Diorama buildings 1:35
All PLASTER buildings can also be casted in RESIN.
In that case 20% will be added to the original price.
NEW! DioDump DD189 Middle East guard tower - 1:35 scale - RESIN
These concrete sewer pipe like guard towers are a common sight along Middle East borders.
The kit contains 6 highly detailed resin pieces.
Unpainted and unassembled. Size approx: height: 19cm - width: 7cm - depth: 7cm
NEW! DioDump DD187 German town gate - 1:35 scale - RESIN
Traditional half-timbered framing town gate dating from early 1800's. The kit contains 10 highly detailed resin parts, windows sheets and curtains, and as a bonus 2 swastika banners. Tanks and street base serve as a diorama example an are not included.
Unpainted and unassembled. Size approx: height: 26cm - width: 16 cm - depth: 6,5cm
Gate entrance approx.: height: 10,5cm - width: 9cm - depth: 5cm
Total weight approx. 700 grams.
NEW! DioDump DD185 Dutch village ruin - 1:35 scale - RESIN
Typical Dutch village house dating from early 1900's. The kit contains six highly detailed resin parts, (stained) glas windows, a curtain and some original Dutch street signs.
Unpainted and unassembled. Size approx: height: 20cm - width: 15 cm - depth: 7,5cm
NEW! DioDump DD186 Church ruin - 1:35 scale - PLASTER
The kit contains 3 highly detailed plaster parts, a resin window frame and a stained glass window sheet.
Unpainted and unassembled. Size approx: height: 21cm - width: 12,5 cm - depth: 6,5cm
NEW! DioDump DD180 Wooden barn - 1:35 scale - RESIN
This universal barn can serve in any rural diorama. All doors can be positioned open or closed. If opened we advise to cover the back of the barn with black cardboard.
The kit contains 14 highly detailed parts, window glass and a metal hook.
Unpainted and unassembled. Size approx: height: 17cm - width: 24 cm - depth: 6 cm
NEW! DioDump DD173 Belgian village house - 1:35 scale - RESIN
This typical Belgian village house characterizes itself by the shingled side wall. A common sight in all parts of Belgium dating back to the early 1900's. Furthermore there is an outside cellar door added.
Kit contains: 7 Highly detailed resin parts, window glass, curtains and roofing lead.
Need a fitting base? Check out DD174 the section 'Diorama streets / bases'.
Unpainted and unassembled. Size house approx: height: 26,5 cm - width: 12.6 cm - depth: 6,8 cm
NEW! DioDump DD013 Italian house ruin Messina - 1:35 scale - PLASTER
This kit from DioDump will definately make a great eyecatcher in your Italian front diorama. Realistic and authentic design.
The hignly detailed plaster parts are easy to assemble and very workable if you wish to add more damage or broken off segments.
The kit includes: - 4 Plaster parts - 2 Resin parts - Flowers - Laser cut fence
Unpainted and unassembled. Size approx: height: 21cm - width: 18,5cm - depth: 3cm Suitable for scale 1:32 / 54mm.
NEW! DioDump DD149 'Alles Kaputt' Berlin ruin - 1:35 scale - PLASTER
This solid kit from DioDump will definately make a great eyecatcher in your late war Germany / Berlin diorama. The massive plaster parts are easy to assemble and very workable if you wish to add more damage or broken off segments. The resin doors can easily be cut in half when a single door is desired. With the clear window sheet you can create (cut with hobby knife, NOT scissors) broken windows.
The kit includes: - 5 Highly detailled plaster parts - 2 Resin parts:double doors and window - 1 Clear plastic window sheet
Unpainted and unassembled. Size approx: height: 23cm - width: 16cm - depth: 6cm (incl. steps). Suitable for scale 1:32 / 54mm.
DioDump DD170 Livestock shed - 1:35 scale - RESIN
A nice idea for a rural diorama might be this livestock shed. Due to it's open front it is more than just a backdrop so figeres and / or small vehicles can be intergrated with the building to create a coherent scene.
5 Highly detailled resin parts
Unpainted and unassembled. Measurements (approx.): length: 16cm, width: 9cm, (front) height: 9cm
DioDump DD160 Dutch city house - 1:35 scale - RESIN
This new kit from DioDump will definately make a great eyecatcher in your diorama. The authentic architecture dates from the early 1800's and has a typical Dutch 'bell facade'. Lots of these houses are still standing today. So wether your subject is historical or modern, you can never go wrong.
The kit includes: 10 Highly detailled resin parts / 'Lace' curtains / 'Glass' windows on clear plastic sheet / Dutch street name signs and house numbers / Sidewalk section with bollard
Unpainted and unassembled. Measurements (approx.): House: height: 27,5cm - width: 14cm - depth: 3-6cm. Sidewalk: length: 17cm - width: 6 - 9.5cm. Suitable for scale 1:32 / 1:35.
DioDump DD150 Vietnamese stilt hut - 1:35 scale - RESIN
Looking for a unique backdrop for your Vietnam diorama? The kit includes:
- 13 Highly detailled resin parts
- 3 Plastic bamboo plants (variable sizes)
- Baboo stems (for construction)
- Binding rope
Unpainted and unassembled. Size approx: height: 16cm - width: 13cm - depth: 9cm.
Also suitable for scale 1:32 / 54mm. Figure is for example/scale purpose only and NOT included.
DioDump DD114 Corner cafe - 1:35 scale - RESIN
This new kit from DioDump will definately make a great eyecatcher in your diorama. Whether your subject is World War 1, World War 2, Zombie apocalypse or civil. The architecture idates from the late 1800's and is typical for Western Europe, UK and (Eastern) USA. You can also use the building as a corner store of any kind. Just replace the printed windows with the clear plastic sheet and fill in your own details.
The kit includes: - 7 Highly detailled resin parts - Curtains ( 2 designs) - (Printed) window on clear plastic sheet - Various vintage enamel signs - A small bag with roof gravel
Unpainted and unassembled. Size approx: height: 20,5cm - width (back): 19cm - depth:10,5cm.
ls suitable for scale 1:32 / 54mm. Figure is for example/scale purpose only and NOT included
DioDump DD124 Middle East shop / house 'Ramadi' 1:35 scale - RESIN
Newly tooled version from April 2020!
This authentic Middle East building will make an impressive backdrop for any modern war diorama based in Iraq, Afghanistan, Syria, Gaza etc. The building has a shop at ground level and an unfinished house on the second floor. It fits perfectly on the DioDump DD125-A Roundabout street base (large) which is sold seperately. Including shop signs, posters, fence, concrete screen blocks and airco unit.
14 Resin parts.
Sizes approx.: height 19 cm, width 17 cm, depth 4 cm .
Unassembled and unpainted.
DioDump DD117 Nissen hut - 1:35 scale - RESIN + cardboard
A Nissen hut is a prefabricated steel structure, made from a half-cylindrical skin of corrugated steel. Originally designed during the First World War by the engineer and inventor Major Peter Norman Nissen. it was used extensively during WW2. They were also known as Quonset hut or Romney hut. This multimedia kit will be a fun build. It will make a great backdrop for your diorama.
Features: - Highly detailed resin front - Resin door, door step and barrel - Plastic stove pipe - Clear window sheets - Aluminium flashing - Corrugated cardboard pieces - Allied directional signs - Sturdy black foamboard backing - Clear assembly guide
Measurements: Wide 18cm / High 9cm (excl. stove pipe) / Deep 5cm (or shorter if desired).
If you would like to extend the strucure to the back you can use DioDump DD008 Corrugated cardboard sheets 1:35 (sold seperate).
Kit is unassembled and unpainted.
DioDump DD115 Large chicken coop - 1:35 scale- RESIN
A full resin kit including clear window sheets and chicken wire. This vintage chicken coop / hen house consists of 8 highly detailed resin pieces. Easy assembly and a guaranteed fun paint job. Measurements approx. : length 11cm, width 11,5 cm, height 8cm.
Kit is unassembled and unpainted. Figure and chicken are for scale / example purpose only and not included.
DioDump DD109 Village wall fountain - 1:35 scale - PLASTER
This authentic old wall with fountain will make a great eye catcher in your (ww2 military) diorama or vignette. The design is suitable for multiple European theaters. Very sharp casted in hard plaster. The main wall has a highly detailed front and a flat back.
Kit contains of 3 plaster parts, 2 small iron rods and a piece of transparent wire. Sizes (approx.): length 19,8cm x height 8,8cm x depth: 3cm.
DioDump DD097 Saddam mural - 1:35 scale - RESIN
This very original DioDump piece will be a true eye catcher in your Iraq diorama or vignette. Murals like these could be found througout Iraq in honour of it's leader Saddam Hussein. After the US invasion in the second Gulf war many were destroyed or vandalised. This particular mural stands 16 cm tall and 9,4cm wide. It consists on 2 detailled resin pieces and a high quality print on thick paper.
Unassembled and unpainted, instructions included. Figure, truck and other diorama accesories are for example / scale reference only and NOT included.
DioDump DD095 German MG bunker - 1:35 scale - PLASTER
This authentic highly detailed bunker section will look great in any WW2 Western front front diorama or vignette. Note that this is not a complete bunker but a section for easy placing as a backdrop on your base. It contains 2 parts in high quality plaster and an additional set of metal hooks (used for attaching camouflage nettings).
If you would like a battle damaged bunker: plaster is easy to work with. Just use a hard pointy tool, to create bullet holes or larger damages inflicted by artllery.
Sizes main structure: height 8,1cm, width front 12,9cm, depth 6,2cm. Figure is for example / scale purpose only and not included.
The kit is safely packed in a decent sturdy cardboard box. Unassembled and unpainted.
DioDump DD089 Small roadside chapel - 1:35 scale - PLASTER
These small chappels can be found all over rural Europe dating back from modern hstory. Notice the small door, the saint plaquette, and many more authentic details. It contains one solid umpainted chapel sharply casted in plaster and a resin cross. Sizes approx.: height 108mm, width 65mm, depth 53mm. Figure and scenery are for example / scale purpose only and not included. The kit is safely packed in a decent sturdy cardboard box.
DioDump DD015 Monastery gate 'Saint-Lo' - 1:35 - PLASTER
This original old wall with gate will make a great eye catcher in your (ww2 military) diorama or vignette. The authentic design is basically suitable for any European theatre. Very sharp casted in hard plaster. The main wall has a highly detailed front and a flat back. There is also a small side wall, detailed on both sides, that can be positioned in multiple ways to match your diorama lay-out. The gate can be constructed from the balsa wood that is also included in the kit. Finally it features a small resin wall shrine. Instructions included. Sizes main wall: length 21,4cm x height 10,7cm.
DioDump DD084 Russian farm house 'Oryol' - 1:35 scale - PLASTER
Traditional Russian log farm house (back side). A true inspiration to build an authentic 'Ostfront' setting diorama or vignette. The kit contains 6 sharply casted plaster parts, a piece of corrugated aluminium and wooden rods. Measurements (approx.): height: 15 cm, width: 17cm, depth: 5cm (excl. shed). Unassembled and unpainted kit.
DioDump DD073 Dutch corner house ´Oosterbeek´ - 1:35 - RESIN
This typical Dutch corner house (that can also be used in a Belgian setting) has 5 sharply casted parts in resin. It also includes clear (stained) glass window sheets, curtains, streetname and house number signs and a gutter .
Sizes approx.: 20 cm high, front walls 6 and 12 cm wide. Instructions included.
DioDump DD067 French village ruin ´Brix` - 1:35 scale - PLASTER
This authentic building will make an impressive backdrop for any (World War 2) diorama or vignette with a Normandy, French or Belgian theme. The unassembled and unpainted kit consists of 3 sharply casted light grey ceramic plaster parts.
Also included are 2 authentic XL wall advertisement decals, plasticized iron wire (for power cables). a piece of plastic pipe (for chimney pipes), a resin window frame and a fitting piece of transparent plastic sheet (for window glass).
Sizes: height 32cm, width (advertisement wall) 10,5cm, depth 10,5cm. Instructions included.
DioDump DD056 Small Shed - 1:35 scale - PLASTER
This versatile and highly detailed shed consists of 4 highly detailed plaster parts, aluminium corrugated sheets and a hand made wooden door. Sizes: width: 80mm. Depth: 70mm. Height 83mm. Instructions included. Unassembled and unpainted.
DioDump DDO51 Ardennes Farm Yard ´Gouvy' - 1:35 scale - RESIN
This highly detailed authentic Ardennes Farm Yard will look great in your Battle of the Bulge diorama or vignette!
The kit contains 5 resin plaster parts and a barrel. Sizes house: height 19,7cm, width 11,5cm, depth 4cm. Sizes gate: height: 10,5cm, width 12,4cm.
Original design by MisterJM Jose Manuel Rico Cortes
DioDump DDO49 Industrial facade - 1:35 scale - RESIN
This highly detailed factory will look great in any urban / industrial diorama or vignette. The kit contains 3 highly detailed resin parts and a corrugated carboard roof. German and Russian printed signs are included. Sizes approx.: height 14,5cm, width 22cm, depth 4,3cm. The unpainted and unassembled kit is safely packed in a decent sturdy cardboard box. Instructions included.
DioDump DDO46 Italian chapel ruin `Cassino` - 1:35 scale - PLASTER
This highly detailed house corner will look great in any Italian front diorama or vignette. It contains 5 parts in high quality ceramic plaster. Sizes house: height 16cm, width 15cm (including arch), depth 8cm
DioDump DDO45 Russian country house ´Zubkov` - 1:35 scale - PLASTER
This highly detailed house corner will look great in any Eastern front diorama or vignette. It contains 3 parts in high quality ceramic plaster. Also included are 12 wooden parts to make your own fence.
Sizes house: height 16cm, width 9.7cm, depth 7,2cm
DioDump DDO41 North African ruin ´Gazala´ - 1:35 scale - PLASTER
The kit consists of 3 highly detailed pieces, sharply casted in high quality light grey ceramic plaster. It also includes a separate wooden door with metal door handle. Sizes: Length 15cm, depth: 3cm, height: 10cm.